 |
Ag Products >
Tree Cutters/Mowers >
Heavy-duty: Tree & Brush Cutters > TimberAx
|
Tree
& Brush Shredder for Skid-steers |
 |
|
NEW!! Special Alloy Knives
Improved Life & Reduced Sharpening!
The revolutionary reverse rotation
design lifts material off the
ground, improving the cutting
action with one single pass,
reducing horsepower requirements
and knife wear or damage.
Competitive models using
forward turning rotors with fixed
carbide or swinging hammers,
drive uncut material into the soil
with no chance to recut for finer
mulching.
Efficiently cuts and mulches up
to 6 inch diameter material with as little as
38 hydraulic horsepower. Intermittently cuts up
to 12 inch or larger diameter material.
Selectively cuts and mulches any
unwanted trees or brush. Cuts trees, brush, vines
or grass with the same knives. Reduces job site
clean-up and impact on terrain.
Nine hydraulic motors to choose
from, 22-54 gpm to perfectly match your skid-steer's
system.
Note: Production
rate will vary depending on the actual hydraulic
horsepower available. A flow and pressure test
is strongly recommended on your power unit before
selecting a TimberAx model. Hydraulic Horsepower
= Flow x Pressure x .90 ÷ 1714
Features
- NEW - Hoses & Hose Holder are included
- Front-mounted, Hydraulic-driven
- Universal Skid-steer Mount
- Adjustable Tree-pusher Bar
- Claw Hooks on Pusher Bar
- Adjustable Shear Bar
- 1700 rpm - 17 inch Diameter
Rotor
- NEW Special Alloy, Sharpened Blades
- Rigid, Pocket-style Knife Mounts
- Premium Strength Steel Body
& Rotor
- 2 3/16 inch Rotor Bearings
- Bearing Anti-wrap Protection
- Heavy-duty, Bearing Block
- Standard High-efficiency Gear-type
Motor
- Optional High Pressure Piston-type
Motor
- Dual Cross-over Relief Protection
- Pressure Gauge to Monitor Capacity
- Steel Deflector Chains
- 3-Groove Banded Belt
- Taper-lock Sheaves
- Spring-loaded Belt Tightener
- Skid Shoes - Adjustable 1 -
3 inches
- Spare Parts Kit
- Tachometer
- Charcoal Grey Paint
|
|
The material is pulled in between the blades
and the adjustable shear bar processes it
to a consistent particle size.
Claw
Hooks
on
Tree
Pusher
Bar
Adjustable re-cutter bar gauges gap between
knives and bar. Anti-wrap deflectors feed
material into knives and protect bearings.
Blades can be sharpened on the machine.
3-groove banded belts with spring-loaded
idler and taper-lock sheeves
Relief valve protected, heavy-duty, hydraulic
motor with external bearing block to support
side-load from belt tension
|
|
Specifications
| Model |
53AX |
63AX |
73AX |
83AX |
| Width of Cut in Inches |
53 |
63 |
73 |
83 |
| Overall Width in Inches |
71.5 |
81.5 |
91.5 |
101.5 |
| Number of Knives |
12 |
14 |
16 |
18 |
| Weight in Pounds |
1920 |
2350 |
2416 |
2565 |
| Crated Weight in Pounds |
2415 |
2695 |
2775 |
3000 |
| |
|
|
|
|
| Model Selections below 3500 PSI - NO case drain. |
| 22-24 GPM, 2500-3500 PSI |
53AXH1 04 |
63AXH1 04 |
73AXH1 04 |
83AXH1 04 |
| |
|
|
|
|
| Model Selections below 3500 PSI - All require case drain. |
| 22-24 GPM, 2500-3500 PSI |
53AXH2 04 |
63AXH2 04 |
73AXH2 04 |
83AXH2 04 |
| 25-28 GPM, 2500-3500 PSI |
53AXH2 05 |
63AXH2 05 |
73AXH2 05 |
83AXH2 05 |
| 29-32 GPM, 2500-3500 PSI |
53AXH2 06 |
63AXH2 06 |
73AXH2 06 |
83AXH2 06 |
| 33-37 GPM, 2500-3500 PSI |
53AXH2 07 |
63AXH2 07 |
73AXH2 07 |
83AXH2 07 |
| 38-42 GPM, 2500-3500 PSI |
53AXH2 08 |
63AXH2 08 |
73AXH2 08 |
83AXH2 08 |
Hoses Included: 25-40 gpm 3/4 inch (-12 male o-ring, thread size 1-1/16”)
*4000 psi - Length of 102” |
| |
|
|
|
|
| Model Selections Above 3500 PSI - All require case drain. |
| 27-31 GPM, 3500-6000 PSI |
53AXH4 26 |
63AXH4 26 |
73AXH4 26 |
83AXH4 26 |
| 32-37 GPM, 3500-6000 PSI |
53AXH4 27 |
63AXH4 27 |
73AXH4 27 |
83AXH4 27 |
Hoses Included: 25-40 gpm 3/4 inch (-12 male o-ring, thread size 1-1/16”)
*5000 psi - Length of 108” |
*Our hoses should fit most makes, however, you are responsible for checking the required
length on your own machine. A 1/2” x 126” case drain hose will be provided (-8 male 0-ring,
thread size 3/4”). Be sure to properly route hoses as described in the operator’s manual.
Quick couplers for hoses are not included.
Warning:
Due to the possible danger
of flying debris, impact-resistant shielding MUST be
provided for the operator. The owner is responsible
for providing operator-protection devices on the power unit.
|
