 |
Light-duty: Flail
Mowers > Skid-steer Mounted
Destroys
and Mulches Grass or Weeds and Cuts Brush up to 3/4
inch (2 cm)
Advantages
- Front-mounted, Skid-steer Hydrostatic
Drive
- Cuts Brush, Weeds or Grass with
Same Knives
- Leaves an Even Mat of Mulch for
Faster Decomposition
- Three Sizes to Choose From: 60,
72 & 90 inch (152, 213 & 228 cm)
- Mowers work with as little as
10 gpm (38 lpm). Note: 20+ gpm (75+ lpm)
is recommended for tall weeds and intermittent
brush.
- Tractor-mounted Models Also Available
(three-point hitch & 540 PTO required)
|
|
Features
- Universal Skid-steer Mount
- 10 gage (3.4 mm) Steel Body
- Curved Hood for Improved Suction
- 1 3/4 inch (4.5 cm) Rotor Bearings
- Bearing Deflector Guard
- 1/4 inch (6.4 mm) Steel Endplate
- Adjustable Skid Shoes
- Structural Steel Frame
- 0 to 4.5 inch (0-11.4 cm) Cutting
Height
- Steel Deflector Shields
- Heavy-duty Vented Belt Shield
- Support Bearing
|
- Directly Coupled Hydraulic Motor
- No Case Drain Needed
- All-welded Hitch
- Rear Steel Deflector
- 1 1/2 inch (3.8 cm) Roller Bearings
- Full-width Adjustable Gage Roller
- Roller Scraper
- Non-slip Safety Step
- Taper-lock Sheaves
- Spring-loaded Belt Tightener
- 3-Groove Banded Belt
|
Knives
|
Cuts Grass or Weeds
and Cuts up to 3/4 inch (2 cm) Diameter Brush
with the Same Knives
Heat-treated Reversible
Side-slice Knives
2100 rpm
110 mph (177 kph)
Knife Tip Speed |
60, 72 & 90 inch (1.52, 1.83 &
2.28 meter) Models
| Models |
60MH |
72MH |
90MH |
| Flow Requirement |
10-54 gpm
(38-204 lpm) |
13-54 gpm
(49-204 lpm) |
21-54 gpm
(79-204 lpm) |
| Cutting Width |
60 inches (1.52
m) |
72 inches (1.83
m) |
90 inches (2.28
m) |
| Overall Width |
72 inches (1.83
m) |
84 inches (2.13
m) |
102 inches (2.59
m) |
| Weight |
750 pounds (340
kg) |
850 pounds (385
kg) |
990 pounds (448
kg) |
| Number of Knives |
80 - 40 sets |
96 - 48 sets |
120 - 60 sets |
|
